1
00:00:01,880 --> 00:00:09,220
Using a virtual machine we are not limited only to emulated or virtualise the hardware.

2
00:00:09,450 --> 00:00:14,990
We can pass it in hardware from the host machine directly to the guest as well.

3
00:00:16,160 --> 00:00:20,130
Let's take a look at using our U.S. we drive.

4
00:00:20,420 --> 00:00:27,140
We could just as easily use the US we've got a webcam or a printer or something else.

5
00:00:28,010 --> 00:00:35,600
I would check them my guest all-British system and then I will go into the setting and use us be on

6
00:00:35,600 --> 00:00:36,110
a Mac.

7
00:00:36,110 --> 00:00:40,000
You will find the under the old settings.

8
00:00:41,440 --> 00:00:45,730
I can choose to use US me one dog one.

9
00:00:45,790 --> 00:00:46,820
You asked me.

10
00:00:47,030 --> 00:00:49,440
You ask me three controller.

11
00:00:49,900 --> 00:00:56,800
Yes me one going to one is the default because to enable the other do we need to have installed a virtual

12
00:00:56,800 --> 00:01:00,330
box extension back.

13
00:01:00,360 --> 00:01:03,170
We did that hardly an hour lectures.

14
00:01:03,360 --> 00:01:12,830
But if you see an end of the next two or three here you will need to check to make sure you have it

15
00:01:12,830 --> 00:01:14,420
installed.

16
00:01:14,510 --> 00:01:20,770
You can still use me without them but only the slow one blind one Sternbergh.

17
00:01:22,050 --> 00:01:32,500
I'll plug my yes we drive into my system the vaguely I believe device to the guest is by using a filter.

18
00:01:33,270 --> 00:01:40,810
Us with devices have manufactured and model codes which is code the system can't tell them apart.

19
00:01:43,580 --> 00:01:51,530
On here on the right side of the list I have two option enabled us to be ACORN with the blue circle

20
00:01:51,590 --> 00:02:01,980
and one with the green plus the button with the Blues creates an empty hole that is a filter with no

21
00:02:01,980 --> 00:02:03,220
information.

22
00:02:03,980 --> 00:02:11,630
And late I read one and then click on the board button then click on the button with the yellow circle

23
00:02:11,630 --> 00:02:14,560
to activate no information.

24
00:02:14,570 --> 00:02:22,030
I don't know this information about my drive so I will close out of here and delete this filter using

25
00:02:22,030 --> 00:02:30,490
a button with that egg minus the button to get the green plus lets me choose a device that plugged in

26
00:02:30,490 --> 00:02:40,800
to make a filter for I will choose my flash drive from the least I know if I did what is what it's like

27
00:02:40,870 --> 00:02:41,860
here.

28
00:02:42,390 --> 00:02:50,010
This specific information for the software to identify my drive with this will turn in place when the

29
00:02:50,010 --> 00:02:51,300
guest starter.

30
00:02:51,450 --> 00:02:53,970
It will look back on the hardware to itself

31
00:02:57,070 --> 00:02:59,130
effectively begin 8.

32
00:02:59,170 --> 00:03:08,260
Right then we can also get them ready and politically add or remove us devices from the guest by selecting

33
00:03:08,290 --> 00:03:11,940
or selecting them from the menu up here.

34
00:03:13,380 --> 00:03:21,150
And their devices and us we are from the U.S. be acorn on the status by adding a device this way we

35
00:03:21,150 --> 00:03:25,780
will try again control of it from the host of any system.

36
00:03:26,270 --> 00:03:28,010
But that does not always work.

37
00:03:28,020 --> 00:03:30,380
Be sure to check that.

38
00:03:30,660 --> 00:03:40,170
The host is using a device before you give control of it to the guest if you don't need the gas to automatically

39
00:03:40,170 --> 00:03:41,740
connect to device.

40
00:03:41,790 --> 00:03:47,030
You can disable or delete the filter from the filter list in the USP settings.

41
00:03:47,870 --> 00:03:51,380
For the system but no I really liked this.

42
00:03:51,400 --> 00:03:52,040
Dr..